Accessories
Radxa Accessories Guide
ποΈ Radxa eMMC Reader
Radxa eMMC USB3 reader is a real emmc card reader with USB3.0 performance. Based on GL3227E Chip design. The GL3227E is an USB 3.1 Gen1 eMMC controller, it provides single LUN (Logic Unit Number) which can support eMMC v5.0, 1/4/8bit data bus, High Speed SDR / High Speed DDR / HS200 / HS400 mode.
ποΈ Radxa Power PD 30W
The Radxa Power PD 30W is an adapter designed specifically for Radxa's SBC products. It can deliver up to 5A at 5V to meet the power requirements of Radxa SBCs even when multiple peripherals are connected. For SBCs that support PD/QC protocol, it can deliver a total of 30W of power at 12V/2.5A. Compatible for all Radxa SBCs.
ποΈ Radxa Camera 4K
Radxa Camera 4K
ποΈ Radxa Display 10 FHD
Radxa Display 10 FHD
ποΈ Radxa eMMC to uSD
Radxa eMMC to uSD is a converts eMMC to uSD module. It is easily transferred and shared through a common uSD card interface. This module is small and easy to install and use, making it ideal for use in embedded systems, mobile devices, and other applications where data transfer is needed. It is a practical storage interface module that is widely used due to its compact size and versatility.
ποΈ eMMC Module
Radxa eMMC Module uses the eMMC 5.1 specification and offers four capacity options: 16G / 32G / 64G / 128G. At the same time, you can choose models that support industrial-grade long life. In addition, this module supports JEDEC's standard eMMC command set and is designed for high-speed read and write, making data transfer faster.
ποΈ Heatsink 4012 for ROCK 5B
Radxa Heatsink 4012 is a radiator for ROCK 5B with a length of 40mm, a width of 40mm and a height of 12mm.
ποΈ Radxa M.2 E key to SATA Breakout Board
M.2 E key to SATA Breakout Board is a solution for expanding the storage capacity of embedded systems.
ποΈ Radxa M.2 M key to SATA Breakout Board
Radxa M.2 M key to SATA Breakout Board is a hardware module that enables users to convert the M.2 M key interface on their computer motherboard into a SATA interface, allowing them to connect a SATA storage device. The module features a compact design and can be easily installed in an M.2 slot, making it an ideal solution for users who want to add additional storage to their system.
ποΈ Radxa SPI Flash Module
The Radxa SPI Flash Module is a flash module with an extremely small form factor that can be detached. It features dual board-to-board connectors, which enables easy replacement without the need for soldering. The main function of the Radxa SPI Flash Module is to enable booting of NVMe SSDs, USB drives, hard disks, and other similar storage devices in Radxa products that do not come with SPI Flash pre-installed.
ποΈ Radxa Wireless Module A8
Radxa Wireless Module A8 is a standard M.2 2230 Wireless Module based on Realtek RTL8852BE, a highly integrated single-chip that support 2-stream Wi-Fi 6 (802.11ax) solutions with multi-user MIMO (Multiple-Input, Multiple-Output) with Wireless LAN (WLAN) PCI Express network interface controller with integrated Bluetooth 5 USB interface controller. It combines a WLAN MAC, a 2T2R capable WLAN baseband, and RF in a single chip.
ποΈ Radxa M.2 Extension Board
Radxa M.2 Extension Boards are solutions for expanding the storage capacity of embedded systems.
ποΈ Radxa Metal Case for ROCK 5B
Radxa has designed a specially customized metal case for the ROCK 5 Model B single board computer. The case is sturdy and provides protection for the board while also allowing easy access to all the ROCK 5B's ports. It also has cooling function which provides passive cooling to the board, ensuring that the ROCK 5B remains cool even under the most demanding conditions. This nifty case is the perfect solution for keeping your ROCK 5B running smoothly and efficiently.
ποΈ Radxa Penta SATA HAT
Radxa ROCK Penta SATA HAT is an addon HAT designed for ROCK Series. It utilizes the high speed PCIe buses on ROCK Series and provides a complete NAS solution based on ROCK Series.
ποΈ Radxa 23W PoE
Radxa 23W PoE HAT
ποΈ Radxa 25W PoE HAT
The Radxa 25W PoE HAT provides boot over Power over Ethernet support for compatible Radxa SBCs.
ποΈ Radxa CM3 IO Board
Radxa CM3 IO Board is the baseboard for Radxa CM3. It is suitable for product evaluation and early stage product development.
ποΈ Radxa CM3S IO Board
Radxa CM3S IO Board is the baseboard for Radxa CM3S. It is suitable for product evaluation and early stage product development.
ποΈ Radxa Display 8 HD
2 items
ποΈ Third Party Peripheral Configuration
1 items