MIPI DSI

Support List

Screen Name	Resolution
Radxa Display 8 HD	1280x800 pixels
Radxa Display 10HD	1200x1920 pixels
Radxa Display 10FHD	1200x1920 pixels

Accessory usage

Radxa Display 8 HD

• Connection

  Connect Radxa CM3I IO Board through the FPC cable as shown:

  

• Enable Overlay

  1. Open the Kconsole terminal via the Application Launcher in the lower left corner and run the rsetup command:

   radxa@radxa-cm3i-io:~$ rsetup 

  2. Enable Overlay by Device Tree Configuration .
  tip

  Please enable [] Enable Radxa Display 8HD Overlay。
  Exit and reboot after enabling the successful display of [*] Enable Radxa Display 8HD for the configuration to take effect.

  3. Reboot

• Test

  After reboot, Radxa 8 inch HD Display is able to display the system screen and supports touch.

Radxa Display 10 HD

• Connection

  Connect Radxa CM3I IO Board through the FPC cable as shown:

  

• Enable Overlay

  1. Open the Kconsole terminal via the Application Launcher in the lower left corner and run the rsetup command:

   radxa@radxa-cm3i-io:~$ rsetup 

  2. Enable Overlay by Device Tree Configuration .
  tip

  Please enable [] Enable Radxa Display 10HD Overlay。
  Exit and reboot after enabling the successful display of [*] Enable Radxa Display 10HD for the configuration to take effect.

  3. Reboot

• Test

  After reboot, Radxa 10 inch HD Display is able to display the system screen and supports touch.