Hardware Use

This section provides an overview of the hardware interfaces on the Cubie A7Z.

📄️ Hardware Interfaces

This section provides an overview of the hardware interfaces on the Cubie A7Z.

📄️ USB Type-C Interface

The Radxa Cubie A7Z features one USB 2.0 Type-C and one USB 3.1 Type-C port.

📄️ MicroSD Card Slot

The Radxa Cubie A7Z features a standard onboard MicroSD card slot, compatible with MicroSD / MicroSDHC / MicroSDXC cards, primarily used as a system boot drive or for expanding storage space.

📄️ Micro HDMI Interface

The Radxa Cubie A7A features one onboard HDMI port for video output, supporting up to 4K@60fps resolution.

📄️ 40-Pin GPIO Interface

The Radxa Cubie A7Z features an onboard 40-Pin GPIO (General Purpose Input/Output) interface, providing highly flexible interface support for hardware expansion.

📄️ MIPI CSI Interface

The Radxa Cubie A7Z features one 4-lane MIPI CSI interface or two 2-lane MIPI CSI interfaces, allowing you to connect cameras via the MIPI CSI interface.

📄️ PCIe 3.0 FPC Interface

The Radxa Cubie A7Z features an onboard PCIe 3.0 FPC interface, supporting the PCIe 3.0 standard with a single-lane (x1) high-speed data expansion interface.

📄️ U-Boot Button

The Radxa Cubie A7Z features an onboard U-Boot button for entering FEL mode.

📄️ Fan Interface

The Radxa Cubie A7Z features an onboard fan interface. You can connect a fan using a 3-Pin 0.8mm cable (fan operating voltage: 5V) to provide cooling for the motherboard.

📄️ Antenna Interface

The Radxa Cubie A7Z comes with onboard WiFi 6 and Bluetooth 5.4, featuring 1 antenna interface for connecting an external antenna to enhance wireless communication performance.