Install System via USB

📄️ Entering EDL Mode

① : Press and hold the EDL button on the board

This guide explains how to flash an eMMC system image to the board using a USB Type-A to Type-A cable.

This guide explains how to flash a system image to a microSD card using a USB Type-A to Type-A cable.

This guide explains how to flash a system image to UFS storage using a USB Type-A to Type-A cable.

This guide explains how to flash a system image to an NVMe SSD using a USB Type-A to Type-A cable.

You need to be logged into GitHub to post a comment. If you are already logged in, please ignore this message.