M.2 M Key 2230 Slot
The Radxa Dragon Q6A features an onboard M.2 M Key 2230 slot, ideal for users requiring high read/write speeds and large storage capacity. It can be used as a system boot drive or to expand storage space.
Interface Parameters
| Parameter | Description |
|---|---|
| Interface Type | M.2 M Key 2230 Slot |
| Protocol/Channels | PCIe Gen3 x2 (2 lanes) |
| Read Speed | 1649 MB/s (Theoretical up to 2000 MB/s) |
| Write Speed | 1467 MB/s (Theoretical up to 2000 MB/s) |
Note: Actual read/write speeds may vary depending on the NVMe SSD brand and usage environment. The above speeds are test data for reference only.
Hardware Connection
Install the M.2 M Key 2230 SSD into the M.2 M Key 2230 slot on the Radxa Dragon Q6A.
Installation Steps
- Insert the M.2 2230 SSD into the slot at approximately 30 degrees
- Gently press down the SSD to ensure good contact with the slot
- Secure the SSD to the motherboard using an M2 × 4mm screw
- Ensure the screw is tight but not over-tightened to avoid damaging the threads
Refer to the Hardware Information tutorial to locate the corresponding hardware interface.
Usage Guide
The M.2 M Key 2230 SSD can be used as a system boot media or as expanded storage space.
System Boot Media
When the M.2 M Key 2230 SSD contains a normally functioning system and there are no boot media with higher boot priority than the M.2 M Key 2230 SSD, the Radxa Dragon Q6A will default to booting the system from the M.2 M Key 2230 SSD.
Please refer Install the system to an NVMe SSD
Expanding Storage Space
M.2 M Key 2230 SSD does not exist in the system or start the system through other system boot media. M.2 M Key 2230 SSD will be used as expanded storage space.
Interface Pin Definition
Please refer to the hardware schematic diagram on the Resource Summary Download page.