MIPI DSI Interface

Support List

Screen Name	Resolution
Radxa Display 8 HD	1280x800 pixels
Radxa Display 10FHD	1200x1920 pixels
Raspberry Pi 7 inch Touchscreen	800 x 480 pixels

Connection

Connect ROCK 3B through the FPC cable as shown:
Enable Overlay
1. Open the Kconsole terminal via the Application Launcher in the lower left corner and run the rsetup command:
```
 radxa@rock-3b:~$ rsetup 
```
1. Enable Overlay by Device Tree Configuration .
tip
Please enable [] Enable Radxa Display 8HD Overlay。
Exit and reboot after enabling the successful display of [*] Enable Radxa Display 8HD for the configuration to take effect.
1. Reboot
Test

After reboot, Radxa 8 inch HD Display is able to display the system screen and supports touch.

Connection

Connect ROCK 3B through the FPC cable as shown:
Enable Overlay
1. Open the Kconsole terminal via the Application Launcher in the lower left corner and run the rsetup command:
```
 radxa@rock-3b:~$ rsetup 
```
1. Enable Overlay by Device Tree Configuration .
tip
Please enable [] Enable Radxa Display 10FHD Overlay。
Exit and reboot after enabling the successful display of [*] Enable Radxa Display 10FHD for the configuration to take effect.
1. Reboot
Test

After reboot, Radxa 10 inch FHD Display is able to display the system screen and supports touch.

Connection

Connect ROCK 3B through the FPC cable as shown:
Enable Overlay
1. Open the Kconsole terminal via the Application Launcher in the lower left corner and run the rsetup command:
```
 radxa@rock-3b:~$ rsetup 
```
1. Enable Overlay by Device Tree Configuration .
tip
Please enable [] Enable Raspberry Pi 7-inch Touchscreen Overlay。
Exit and reboot after enabling the successful display of [*] Enable Raspberry Pi 7-inch Touchscreen for the configuration to take effect.
1. Reboot
Test

After reboot, Raspberry Pi 7' touchscreen display is able to display the system screen and supports touch.