MIPI DSI Interface

Support List

Screen Name	Resolution
ALLNET 5 inch DSI Display	800 ×3(RGB) ×480 pixel
Radxa Display 8 HD	1280x800 pixel
Radxa Display 10FHD	1200x1920 pixel
Raspberry Pi 7 inch Touchscreen	800 x 480 pixels

Accessory Usage

ALLNET 5 inch DSI Display

• Connection

  Connect ROCK 5A through the FPC cable as shown:

  

• Enable Overlay

  1. Open the Kconsole terminal via the Application Launcher in the lower left corner and run the rsetup command:

   radxa@rock-5a:~$ rsetup 

  2. Enable Overlay by Device Tree Configuration .
  tip

  Please enable [] Enable Radxa Display 8HD Overlay。
  Exit and reboot after enabling the successful display of [*] Enable Radxa Display 8HD for the configuration to take effect.

  3. Reboot

• Test

  After reboot, Radxa 8 inch HD Display is able to display the system screen and supports touch.

Radxa 8 inch HD Display

• Connection

  Connect ROCK 5A through the FPC cable as shown:

  

• Enable Overlay

  1. Open the Kconsole terminal via the Application Launcher in the lower left corner and run the rsetup command:

   radxa@rock-5a:~$ rsetup 

  2. Enable Overlay by Device Tree Configuration .
  tip

  Please enable [] Enable Radxa Display 8HD Overlay。
  Exit and reboot after enabling the successful display of [*] Enable Radxa Display 8HD for the configuration to take effect.

  3. Reboot

• Test

  After reboot, Radxa 8 inch HD Display is able to display the system screen and supports touch.

Radxa 10 inch FHD Display

• Connection

  Connect ROCK 5A through the FPC cable as shown:

  

• Enable Overlay

  1. Open the Kconsole terminal via the Application Launcher in the lower left corner and run the rsetup command:

   radxa@rock-5a:~$ rsetup 

  2. Enable Overlay by Device Tree Configuration .
  tip

  Please enable [] Enable Radxa Display 10FHD Overlay。
  Exit and reboot after enabling the successful display of [*] Enable Radxa Display 10FHD for the configuration to take effect.

  3. Reboot

• Test

  After reboot, Radxa 10 inch FHD Display is able to display the system screen and supports touch.

Raspberry Pi 7" touchscreen display

• Connection

  Connect ROCK 5A through the FPC cable as shown:

  

• Enable Overlay

  1. Open the Kconsole terminal via the Application Launcher in the lower left corner and run the rsetup command:

   radxa@rock-5a:~$ rsetup 

  2. Enable Overlay by Device Tree Configuration .
  tip

  Please enable [] Enable Raspberry Pi 7-inch Touchscreen Overlay。
  Exit and reboot after enabling the successful display of [*] Enable Raspberry Pi 7-inch Touchscreen for the configuration to take effect.

  3. Reboot

• Test

  After reboot, Raspberry Pi 7 inch touchscreen display is able to display the system screen and supports touch.