MIPI DSI Interface

Support List

ROCK 5B

Screen Name	Resolution
ALLNET 5 inch DSI Display	800 ×3(RGB) ×480 pixels
Radxa Display 8 HD	1280x800 pixels
Radxa Display 10FHD	1200x1920 pixels
Raspberry Pi 7 inch Touchscreen	800 x 480 pixels

ROCK 5B+

Screen Name	Resolution
Radxa Display 8 HD	1280x800 pixels
Radxa Display 10HD	1200x1920 pixels
Radxa Display 10FHD	1200x1920 pixels

Accessory Usage

tip

Only these two are given as examples. Apart from possible differences in wiring and overlay, the operational steps for other screens are similar.

Radxa 8 inch HD Display

• Connection

  Connect ROCK 5B through the FPC cable as shown:

  

• Enable Overlay

  1. Open the Kconsole terminal via the Application Launcher in the lower left corner and run the rsetup command:

   radxa@rock-5b:~$ rsetup 

  2. Enable Overlay by Device Tree Configuration .
  tip

  Please enable [] Enable Radxa Display 8HD Overlay。
  Exit and reboot after enabling the successful display of [*] Enable Radxa Display 8HD for the configuration to take effect.

  3. Reboot

• Test

  After reboot, Radxa 8 inch HD Display is able to display the system screen and supports touch.

Raspberry Pi 7" touchscreen display

• Connection

  Connect ROCK 5B+ through the FPC cable as shown:

  

• Enable Overlay

  1. Open the Kconsole terminal via the Application Launcher in the lower left corner and run the rsetup command:

   radxa@rock-5b:~$ rsetup 

  2. Enable Overlay by Device Tree Configuration .
  tip

  Please enable [] Enable Raspberry Pi 7-inch Touchscreen Overlay。
  Exit and reboot after enabling the successful display of [*] Enable Raspberry Pi 7-inch Touchscreen for the configuration to take effect.

  3. Reboot

• Test

  After reboot, Raspberry Pi 7 inch touchscreen display is able to display the system screen and supports touch.