Skip to main content

Windows Host

File Download​

Install RKDevTool

RKDevTool is Rockchip's software for USB burning on Windows platform. If RKDevTool is not installed on your Windows host, please follow the steps below to install it.

Please download and extract the following files to install RKDevTool:

Installation of drivers​

Download and unzip DriverAssistant, then execute DriverInstall.exe and click the Install Driver button to install the driver. If you have already installed another version of driver, please click Uninstall Driver to uninstall the driver first, and then reinstall it again.

RK Driver

Install RKDevTool​

Unzip RKDevTool_Release_v2.96_zh.zip，Click RKDevTool.exe to Open.

Enter Maskrom mode​

  1. Remove the microSD card and power cable.
  2. Press and hold the Maskrom button.
  3. Insert the USB A-C cable into the Type-C port of ROCK 5B, with the other end plugged into the computer. This should normally put it into Maskrom mode.
rock 5b maskrom wire

If the operation is normal, RKDevTool will prompt A MASKROM device was found.

rkdevtool maskrom

Flash images into storage media.​

eMMC​

  • Select Loader (see File Download section above).
  • Right click, select Add item, select eMMC as the storage media.
  • Select the system image (see above section on file download, you need to unzip it into .img format after downloading).
  • Click Execute to start burning
images path

If there is a prompt Download complete, it means the burning is complete, the system will be restarted automatically after burning, and you can log in to the system via HDMI or serial port.

tip

Account and password are both radxa