Boot from SDCard

File Download

Please go to the Resource Download section to download the corresponding image.

microSD Card Preparation

Insert the microSD card into the SD card reader, and then plug the reader into the USB port of your PC.

Image Flash

Balena Etcher is a cross-platform and user friendly image file burning tool that we recommend you use.

1. Download Etcher and install it.

Windows

Please download balenaEtcher-2.1.4.Setup.exe After the download is complete, there is no need to perform any additional actions. After downloading, you can double click it to open it without any additional operation.

Linux

Please download balena-etcher_2.1.4_amd64.deb. Once the download is complete, please install it by executing the following command in the terminal:

sudo dpkg -i balena-etcher_2.1.4_amd64.deb

2. Open Etcher

   

3. Click Flash from file to select the image to write to.

Image Note

The downloaded system image is in compressed format. You must decompress it first before using Balena Etcher for image flashing.

4. Click Select target to select the device, please select carefully.

   

5. Click Flash! Start writing and wait for the write progress bar to complete.

   

6. When writing the image successfully, Etcher will display Flash Complete!.

   

If there is an error in flashing, please try again.