Skip to main content

Function Pins

Usage Instructions​

nRPIBOOT​

Short circuit the pins shown in the figure below to enable the recovery function and enter the loader download mode.

J2

BT_nDis / WL_nDis​

J3

Before the system boots, connect the BT_nDis pin to the ground to disable the Bluetooth function.

Before the system starts up, connect the WL_nDis pin to the ground, and this can disable the Wi-Fi function.

GLOBAL_EN / RUN_PG​

J1

Connect GLOBAL_EN to the ground to achieve the shutdown function.

Connect RUN_PG to the ground, and the system will perform the restart function.

    You need to be logged into GitHub to post a comment. If you are already logged in, please ignore this message.

    Radxa-docs © 2026 by Radxa Computer (Shenzhen) Co.,Ltd. is licensed under CC BY 4.0