Skip to main content

GPIOD Usage

GPIOD Introduction

The GPIO sysfs interface has been deprecated since Linux 4.8. Userspace should instead use libgpiod to interact with GPIO character devices.

Key features​

  • Easy to use: libgpiod provides a simple API that makes controlling and operating GPIO devices easy to understand. Developers only need to understand basic GPIO concepts and function interfaces to use it.
  • Independence: libgpiod is a standalone user-space library that does not depend on any particular hardware platform or chip. It is suitable for a wide range of embedded platforms that support GPIO control, such as the Radxa ROCK series, Raspberry Pi, BeagleBone, and so on.
  • Multiple Programming Languages Support: libgpiod supports C language natively, and also provides Python bindings (python3-libgpiod) and wrappers for other languages, which makes it easy to use in different programming languages.
  • Efficient Event Listening: libgpiod provides functionality for asynchronous event listening, such as waiting for GPIO state changes. This allows developers to implement efficient event-driven applications.
  • GPIO specification support: libgpiod provides support for different GPIO specifications and numbering methods, including GPIO numbering and physical pin numbering.

Command Line Tools​

libgpiod provides a variety of command line tools, for viewing and control GPIO devices.

gpioinfo​

Display GPIO device information:

radxa@radxa-zero2:~$ gpioinfo
gpiochip0 - 85 lines:
        line   0:     "PIN_27"       unused   input  active-high
        line   1:     "PIN_28"       unused   input  active-high
        line   2:      "PIN_7"       unused   input  active-high
        line   3:     "PIN_11"       unused   input  active-high
        line   4:     "PIN_13"       unused   input  active-high
        line   5:     "PIN_15"       unused   input  active-high
        line   6:     "PIN_18"       unused   input  active-high
        line   7:     "PIN_40"       unused   input  active-high
        line   8:      unnamed       unused   input  active-high
        line   9:      unnamed       unused   input  active-high
...

gpiodetect​

List all GPIO controllers in the system:

radxa@rock-pi-s:~$ gpiodetect
gpiochip0 [gpio0] (32 lines)
gpiochip1 [gpio1] (32 lines)
gpiochip2 [gpio2] (32 lines)
gpiochip3 [gpio3] (32 lines)
gpiochip4 [gpio4] (32 lines)

gpioget​

Read GPIO input:

radxa@radxa-zero2:~$ gpioget gpiochip0 0
1

gpioset​

info

Unlike the traditional sysfs, by default gpioset will exit as soon as the GPIO output has been set. Whether the output will stay at the same level is platform-defined, so you cannot rely on this behavior.

To persistently set the GPIO level, please follow the below example to set the working mode to signal.

Set GPIO output:

radxa@radxa-zero2:~$ gpioset -m signal gpiochip0 0=1
(Press Ctrl+C to stop)

gpiomon​

Monitor GPIO events:

radxa@radxa-zero2:~$ gpiomon gpiochip0 0
(GPIO event output)

gpiofind​

Find GPIO chip and line:

radxa@radxa-zero2:~$ gpiofind PIN_27
gpiochip0 0
tip

You can combine gpiofind and gpioget/gpioset/gpiomon to avoid hard-coding GPIO line info in your script:

radxa@radxa-zero2:~$ gpioget $(gpiofind PIN_27)
1

Programming Reference​

The relevant header files need to be installed before use:

sudo apt-get update
sudo apt-get install libgpiod-dev

Convert vendor gpio to libgpiod​

  • Naming conventions

There are usually 5 groups (also called banks) of GPIOs on the Rockchip platform: GPIO0 ~ GPIO4 (varies from chip to chip), each group has 32 GPIOs. Each group of GPIOs is divided into 4 groups, A/B/C/D, with 8 GPIOs in each group (0~7, also called bank_idx). rockchip.h)). So the GPIOs can be named from GPIO0_A0 to GPIO4_D7. Taking GPIO3_C5 as an example, we can deduce that its bank is 3 and its bank_idx is 21, i.e. GPIO3_C5 is the 21st GPIO in group 3.

  • Correspondence to libgpiod

The GPIO bank of Rockchip platform corresponds to gpiochip in libgpiod, and bank_idx corresponds to gpio line. Take GPIO3_C5 as an example, it is in libgpiod, gpiochip is 3 and line is 21.