Skip to main content

Preparation

Power Supply​

ZERO 2 PRO is powered by Type-C connector with 5V input voltage, recommended to use a power adapter with a rated maximum current greater than 2A.
We recommend using the official Radxa Power PD 30W. Radxa Power PD 30W

Boot Media​

Onboard eMMC or sd-card
If the board doesn't have an onboard eMMC(The eMMC is located on the back of the board) you need to prepare a sd card with at least 8GB.
If you need to install an image with desktop environment, please use a sd card with at least 16GB, 32GB is recommended.

microSD card reader​

For flashing the system image.