Skip to main content

Install the system on the MicroSD card

File download​

Please refer to download to download the system os image.

MicroSD card preparation​

Insert the MicroSD Card into the MicroSD Card Reader, and then insert Reader into the USB port of your PC.

Install os on MicroSD Card​

Balena Etcher is a cross-platform and user friendly image file burning tool that we recommend you use.

  1. Download Etcher and install it.

Please download balenaEtcher-Setup-1.18.11.exe After the download is complete, there is no need to perform any additional actions. After downloading, you can double click it to open it without any additional operation.

  1. Open Etcher

  2. Open Etcher and click Flash from file to select the image to write to.

  3. Click Select target to select the device, please select carefully.

  4. Click Flash! Start writing and wait for the write progress bar to complete.

  5. When writing the image successfully, Etcher will display Flash Complete!.

**If there is an error in flashing, please try again. **

Boot the system​

After successfully installed OS in the MicroSD Card, insert the MicroSD Card into the MicroSD Card slot (as shown in the picture below), then power on the system, the system will start to boot up, and the power indicator will start to blink.

radxa-e20c pack

Logging in to the system​

For RadxaOS

User: radxa, Password: radxa

For iStoreOS

User: root, Password: password