Skip to main content

preparation

Preparation​

Development preparation​

Power supply​

The ROCK 5 ITX is powered by a 12V power supply, and it is recommended to use a minimum 12V/3A power adapter.

::: warning

  • The system only supports 12V input
  • DC input/POE input/ATX PWR input to the motherboard are all 12V, and the three power supplies are connected in parallel, which does not support multiple power supplies being inserted simultaneously
  • The 12V power supply directly supplies SATA PWR and EDP. If a higher power supply is mistakenly inserted, it will damage the corresponding components and circuits

:::

Storage (choose one out of three)​

-MicroSD, greater than 8GB (for booting from SD) -EMMC Module (On board) -NVME SSD (M.2 interface ,for booting from SPI-NVME)

Card Reader (either one or the other)​

  • microSD card reader (for booting from SD)
tip

The microSD card reader is only required when starting ROCK 5 ITX using microSD

List Of Accessories