Install the system to EMMC
Preparation
- ROCK 5B main board
- eMMC module
- 1x USB cable (USB C on one end, USB A on the other)
- 1x 9V/2A or 12V/2A, 15V/2A and 20V/2A power adapter(recommended Radxa Power PD30W)
Image Download
Please go to Resource Download Summary to download the corresponding image file.
Enter Maskrom mode
- Press and hold the Maskrom button.
- Plug the USB A-C cable into the Type-C port of the ROCK 5B and the other end into your computer.
- Confirm that the ROCK 5B is in Maskrom mode.
# MacOS side.
Result after running lsusb
Output:Bus 000 Device 004: ID 2207:350b Fuzhou Rockchip Electronics Co.
# Linux.
Result after executing lsusb
Output:Bus 001 Device 030: ID 2207:350b Fuzhou Rockchip Electronics Company
# Windows: Open RKDevTool.
Open RKDevTool and you will see that the device is in the Found One MASKROM Device state.
Install system to eMMC
Installation in Windows environment
Booting the system
- Power up the board and start the system with the status light blinking.
tip
ROCK 5B supports 5V/12V/20V
power supply. Radxa recommends using Radxa Power PD30W.
Login
There are two default users for official system.
-
username: radxa password: radxa
-
username: rock password: rock
More info please refer to RadxaOS