Skip to main content

Radxa Display 10 FHD

Radxa Display 10 FHD


The Radxa Display 10 FHD supports 10-point touch and has a 10.1-inch (10:16) display area with a resolution of 1200 × 1920 pixels.

It has the following features:

  • Panel Size: 10.1 inch
  • Compliant with RoHS design standards
  • Outline Dimension: 155(H) x 246.16(V) x 5.95(D) mm
  • Display area: 135.36(H) x 216.58 (V) mm
  • Number of Pixel: 1200RGB (H) x 1920 (V) pixels
  • Pixel pitch: 0.0564 (H) x 0.1692(V)s mm
  • Pixel arrangement: RGB Vertical stripe
  • Color Filter Array: RGB vertical stripes
  • Backlight: White LED
  • Electrical Interface: MIPI
  • Built-in Gravity Sensor


1NCNo connection21MIPI_3P+MIPI differential data input
2VDDPower Voltage for digital circuit 3.3V22GNDGround
3VCCIOPower Voltage for digital circuit 1.8V123GNDGround
4INT1INT 124TP_RESETExternal interrupt to the Host Reset
5ResetGlobal Reset Pin 1.8V125TP_VCCPower Voltage for digital circuit 3.3V
6INT2INT 226TP_INTExternal Low is active
7GNDGround27TP_SDAI2C data input and output
8MIPI_0N-MIPI differential data input28TP_SCLI2C clock input
9MIPI_0P+MIPI differential data input29GNDGround
11MIPI_1N-MIPI differential data input31VDDPower Voltage for digital circuit 3.3V
12MIPI_1P+MIPI differential data input32VDDPower Voltage for digital circuit 3.3V
14MIPI_CKN-MIPI differential clock input34GNDGround
15MIPI_CKP+MIPI differential clock input35LED-Power for LED backlight (Cathode)
16GNDGround36LED-Power for LED backlight (Cathode)
17MIPI_2N-MIPI differential data input37NCNo connection
18MIPI_2P+MIPI differential data input38NCNo connection
19GNDGround39LED+Power for LED backlight (Anode)
20MIPI_3N-MIPI differential data input40LED+Power for LED backlight (Anode)

Mechanical Specification

Radxa Display 10 FHD


  1. The 3 PIN and 5 PIN should be the same as 1.8v or 3.3v 2